MemTest86 10.5 Pro Configuration: Detailed Explanation

The given command is a configuration for running MemTest86 version 10.5 Pro. Here is a breakdown of the different options and their meanings:

• MEMREMMB=16: Sets the amount of memory to be reserved for testing to 16MB.
• MINMEMRANGEMB=16: Specifies the minimum range of memory to be tested, also set to 16MB.
• CPUSEL=PARALLEL: Selects the parallel CPU testing mode.
• CPUNUM=0: Specifies the CPU number to be used for testing. In this case, CPU 0 is selected.
• MAXCPUS=128: Sets the maximum number of CPUs to be used for testing to 128.
• TSTLIST=0,1: Specifies the test patterns to be used. In this case, test patterns 0 and 1 are selected.
• NUMPASS=1: Sets the number of passes to be performed to 1.
• ECCPOLL=0: Disables ECC error polling.
• ECCINJECT=0: Disables ECC error injection.
• MEMCACHE=1: Enables memory caching.
• PASS1FULL=0: Disables full pass 1 testing.
• LANG=en-US: Sets the language to English (United States).
• REPORTNUMERRS=10: Sets the maximum number of errors to be reported to 10.
• REPORTNUMWARN=0: Sets the maximum number of warnings to be reported to 0.
• AUTOMODE=0: Disables automatic testing mode.
• AUTOREPORT=1: Enables automatic reporting of test results.
• AUTOREPORTFMT=HTML: Sets the automatic report format to HTML.
• AUTOPROMPTFAIL=0: Disables automatic prompt on test failure.
• TCPSERVERIP=, TCPSERVERPORT=, TCPCLIENTIP=: Specifies the TCP server and client IP addresses and port numbers. These options are left blank in the given command.
• SKIPSPLASH=0: Disables skipping the MemTest86 splash screen.
• SKIPDECODE=0: Disables skipping the SPD decoding.
• EXITMODE=1: Sets the exit mode to automatically reboot the system on completion.
• CHECKMEMSPDSIZE=0: Disables checking the memory SPD size.
• SAMESPDPARTNO=0: Disables checking if all DIMMs have the same part number.
• SPDMATCH=0: Disables checking if all DIMMs have matching SPD content.
• HAMMERMODE=DOUBLE: Sets the hammer mode to double-sided.
• HAMMERSTEP=0x1000000: Sets the hammer step size to 16MB.
• DISABLEMP=0: Enables multi-processor testing.
• ENABLEHT=0: Disables Hyper-Threading testing.
• CONSOLEMODE=0: Disables running MemTest86 in console mode.
• BITFADESECS=300: Sets the duration for bit fade tests to 300 seconds.
• MAXERRCOUNT=10000: Sets the maximum number of errors to be displayed to 10,000.
• TRIGGERONERR=0: Disables triggering an external event on error detection.
• REPORTPREFIX=DEFAULT: Sets the report prefix to the default value.
• TFTPSTATUSSECS=60: Sets the duration for TFTP status updates to 60 seconds.
• PMPDISABLE=0: Enables PMP (Platform Memory Protection) testing.
• TCPDISABLE=1: Disables TCP testing.
• DHCPDISABLE=1: Disables DHCP (Dynamic Host Configuration Protocol) testing.
• RTCSYNC=0: Disables real-time clock synchronization.

Note: Some options may require further configuration or specific values to be set.