UART Initialization and Configuration for Microcontrollers - USART1 and USART0

The code is initializing and configuring two UART modules (USART1 and USART0) on a microcontroller. \u000a\u000aUSART1 is initialized with a baud rate of 115200 and a clock frequency of 4MHz. The UART mode is set to low frequency baud rate generation. The module is enabled for operation, and receive interrupts are enabled.\u000a\u000aUSART0 is initialized with a baud rate of 9600 and a clock frequency of 16MHz. The UART mode is set to oversampling baud rate generation. The module is enabled for operation.\u000a\u000aThe functions "send0" and "Uart_SendChar" are used to send characters over USART0. The "send0" function sends a string by iterating through the characters and transmitting them one by one. The "Uart_SendChar" function transmits a single character.\u000a\u000aNote: The code assumes that the necessary header files and definitions for the microcontroller are included.