Safety Production Management System and Regulations for [Company Name]

{/n/'title/': /'Safety Production Management System/',/n/'content/': /'In order to strengthen safety production management, prevent and eliminate all accidents, and ensure safety production, the safety production management system is formulated in accordance with the actual situation of our factory.//n//n1. Non-electricians are prohibited from disassembling and installing electrical circuits. The electrical circuits in each workshop and department must be in good condition.//n//n2. The protective covers of various presses must be kept intact. The protective covers of presses that have been removed for maintenance or other reasons must be reinstalled before starting up.//n//n3. During working hours, employees must wear protective equipment properly. Special workers are not allowed to work without wearing proper protective equipment.//n//n4. During working hours, regardless of the type of work, it is prohibited to wear slippers, high-heeled shoes, bell-bottoms, or unconventional attire. It is also not allowed to enter the production workshop with long braids.//n//n5. It is strictly forbidden to bring fire sources into flammable and explosive areas, especially warehouses.//n//n6. Firefighting equipment is one of the important measures to protect national wealth from fire. Everyone should take care of it and know how to use it. It is strictly prohibited for anyone to play with firefighting equipment.//n//n7. In the event of an accident requiring more than 2 days of rest in each workshop or department, it must be reported to the factory office within 24 hours of the accident. In the event of a major personal injury accident, the scene should be protected as much as possible and reported to the general manager immediately.//n//n8. Regardless of the type of accident, the principle of ///'no neglect///' must be adhered to. This means not neglecting the causes of accidents, not exempting the responsible parties and relevant personnel from education, and not neglecting the failure to formulate qualified preventive measures.//n//n9. The working hours should be conducted in a tense and serious atmosphere, and it is strictly prohibited to laugh or make noise.//n//n10. All projects specified in the ///'Safety Rectification Notice///' issued by the factory office must be completed on time.//n//n11. Smoking is strictly prohibited in the factory area (including production workshops). Smokers should go to designated smoking areas.//n//n12. New apprentice workers must not be assigned to work without undergoing safety production third-level education (factory, workshop, and team).//n//n13. It is strictly prohibited to litter fruit peels, fruit skins, waste paper, gloves, and towels in the factory area (including production workshops).//n//n14. Drinking and eating are prohibited in the production area./',/n/'title/': /'Safety Production Rewards and Penalties System/',/n/'content/': /'1. According to the superior's instructions, after any type of accident, in addition to disciplinary actions against the leaders of the company and the direct responsible persons for the accident (based on the severity of the situation), economic sanctions will be imposed and 20% of the monthly salary will be deducted for 3-6 months.//n//n2. The person responsible for a safety accident in a workshop or department will have their monthly bonus deducted. In the event of a major personal injury or major equipment accident, the workshop or department will have their entire monthly bonus deducted. The person responsible for the accident, the workshop leader, and the safety officer of the team will have their salaries deducted by 10%-15% for 3-6 months.//n//n3. Non-electricians who disassemble and install electrical circuits will be fined 300 yuan for the first offense, and those who cause accidents will be held responsible. All kinds of electrical equipment, especially knife switches and fuse boxes, must be kept in good condition. Unauthorized removal or repair will result in a fine of 100 yuan.//n//n4. The protective covers of various presses must be kept intact. If the protective covers are not reinstalled before starting up after being removed for maintenance or other reasons, a fine of 100 yuan will be imposed. Those who cause accidents due to the absence of protective covers will be dealt with seriously.//n//n5. It is strictly prohibited for children to enter the workshop during working hours. Violators will be fined 50 yuan.//n//n6. Those who bring fire sources into flammable and explosive areas will be fined 300-500 yuan. Those who cause fire accidents will be held responsible.//n//n7. No one is allowed to play with firefighting equipment. Violators will be fined 300-500 yuan according to the Public Security Administration Regulations. A reward of 100 yuan will be given to those who report such behavior.//n//n8. In the event of a safety accident requiring more than 2 days of rest, it must be reported to the security department within 24 hours of the accident. Failure to report on time will result in a fine of 100 yuan for the team safety officer and a fine of 200 yuan for the workshop safety officer.//n//n9. Fighting during working hours will result in a fine of 500 yuan. Those who cause accidents will be subject to double fines and will be held responsible for all losses and expenses. They will also be dismissed.//n//n10. Those who fight against various illegal commands and operations and promptly report them to the security department will be commended and rewarded accordingly.//n//n11. Those in charge, workshop safety officers, and team safety officers who perform well or make contributions to safety work will be rewarded periodically or given allowances when conditions permit. Employees who perform well in safety work will also be rewarded periodically.//n//n12. This system shall be effective from the date of announcement./',/n/'title/': /'Main Equipment Safety Management System/',/n/'content/': /'1. The operators of main equipment must undergo certain training and pass the examination before they can be qualified for operation.//n//n2. Proper records must be kept, such as shift handover records, regular patrol records, accident records, and maintenance records.//n//n3. During equipment operation, operators must concentrate and not leave their positions, engage in idle talk, or do anything unrelated to their work.//n//n4. In the event of abnormal situations during operation, the on-duty personnel should handle them urgently according to the operating procedures and report to superiors.//n//n5. The main equipment must not exceed the specified pressure and temperature for operation. Various indicators and safety devices should be sensitive, accurate, and reliable.//n//n6. The main equipment must not operate with defects. Regular preventive tests should be conducted, and records should be kept to ensure awareness. For equipment that is not frequently used, maintenance and inspection should be done before reusing.//n//n7. Operators should receive accident prevention education to enhance their sense of safety responsibility.//n//n8. Maintenance personnel for main equipment must work diligently, strengthen their sense of responsibility, and not engage in careless work.//n//n9. The work site should be kept clean, tidy, and convenient for operation. Unauthorized personnel should not be allowed to enter./',/n/'title/': /'Documented Information for Safety Production Inspection Form QR7.1.4-02/',/n/'content/': /'Contract No. [Contract Number]/'/