'LCM_UTIL_FUNCS' has no member named 'set_gpio_out_strength' Error Solution

The error is caused by the line 'lcm_util.set_gpio_out_strength(LSCK_GPIO_PIN, GPIO_OUT_STRENGTH_4MA);' which is trying to call the function 'set_gpio_out_strength' from the struct 'LCM_UTIL_FUNCS' using the variable 'lcm_util'. However, the struct 'LCM_UTIL_FUNCS' does not have a member named 'set_gpio_out_strength'.

To fix the error, you need to check the documentation or header file for the correct function name to use for setting the GPIO output strength. It may be that the function name has changed or is different for the particular platform or hardware that you are using.

Here are some troubleshooting steps:

1. Check the documentation: Refer to the documentation for the specific hardware platform or GPIO library you are using. The documentation should outline the available functions and their usage.
2. Verify the function name: Ensure that the function name 'set_gpio_out_strength' is indeed defined within the 'LCM_UTIL_FUNCS' struct. The name might have changed or may be a different function altogether.
3. Examine the hardware: If the documentation doesn't provide the necessary information, check the hardware datasheet or manufacturer's website for details on how to configure the GPIO output strength.
4. Consider alternative functions: If 'set_gpio_out_strength' is not available, explore alternative functions within the GPIO library that might offer similar functionality.

By following these steps, you can identify and address the source of the error and ensure that your code correctly sets the GPIO output strength for your application.