现场查看工厂计量设备 - 成品油流量计、碱液液位计及电表

On May 18th, accompanied by the consignee's representative and their loss adjuster, we were able to inspect some of the factory's measuring equipment on site. We inspected the flow meters for finished oil, the level gauges for the caustic soda tank, and the electricity meter.

There are two finished oil filling lines in the factory, each equipped with a flow meter near the storage filling position. At 1655hrs, we noticed that the cumulative readings of the two flow meters were 618,189 cubic meters and 213,564 cubic meters, respectively.

The caustic soda tank in the factory is equipped with a pressure-type level gauge. During the 1650 inspection, we noticed that the level gauge displayed a pressure of 33.127kpa and a capacity of 23.7%. We also noted that every one centimeter change in the tank's liquid level corresponds to 287 kilograms of caustic soda.

The consignee took us to visit the distribution room and provided the original data for the electricity meter reading. We verified the meter reading data and the display data for 0800 on that day on site and noticed that the original data and the display data were basically consistent.