作为一名优秀的翻译请你用正式的表达用英语翻译以下说明书内容注意语言的规范性和正确性并按照原文格式进行排版。导电环 产品说明书 特性 项目 说明 尺寸 定制尺寸配合轴径最小6mm无上限可采用分体、分段式设计 纤维柔韧性 采用特殊金属碳纤维材料设计条件下连续正反转不会产生纤维折断且不影响导电性能 纤维牢度 100N30S不松脱 摩擦阻力 专为最小化摩擦而设计的纤维配合尺寸对电机性能的影响可忽略不计 磨

Conductive Ring Product Manual

Characteristics: Item Description Size Customizable, compatible with shaft diameter minimum of 6mm, no upper limit (can adopt modular or segmented design) Fiber Flexibility Utilizes special metal carbon fiber material, under design conditions, continuous positive and reverse rotation will not cause fiber breakage and will not affect conductivity Fiber Fastness 100N, not loosening for 30 seconds Friction Resistance Fiber dimensions designed to minimize friction, negligible impact on motor performance Wear Resistance Under a linear velocity of 58.5m/s, operates for 280,000 kilometers with no significant change in static resistance, fiber wear is approximately 0.4mm

Environmental Requirements: Maximum Operating Temperature 200 degrees Celsius (If long-term use at temperatures exceeding 200 degrees Celsius is required, please contact MPT engineers for validation) Minimum Operating Temperature -45 degrees Celsius (If long-term use at temperatures below -45 degrees Celsius is required, please contact MPT engineers for validation) Environmental Humidity Relative humidity 0-90% RH (If long-term operation under higher humidity conditions is required, please contact MPT engineers for validation) Dust and Dirt Small amount of dust has little impact on conductivity, but when encountering non-conductive and high-viscosity non-Newtonian fluids, it may affect fiber extension and seriously impact conductivity. Grease Environment Does not chemically react with the majority of oils and esters; Small amounts of oil/esters will be brushed off without affecting conductivity; In ATF oil environment, the wear life of the conductive fiber will be extended, but if the dynamic viscosity of the oil exceeds 100mPaS, the conductivity of the conductive ring will be affected.

Note: The above information is provided as a reference. For specific applications, please contact MPT engineers for further assistance