MPY32CTL0 = MPYDLY32 + MPYDLYWRTEN;
This line of code sets the MPY32CTL0 register to enable delay cycles for multiplication and writing to the multiplication registers.
MPY32CTL0 is a control register for the MSP430's 32-bit hardware multiplier. It is used to configure various settings related to multiplication, such as the operand sizes and the type of multiplication to perform (signed/unsigned).
MPYDLY32 and MPYDLYWRTEN are two bit fields within the MPY32CTL0 register.
MPYDLY32 enables an additional delay cycle for multiplication. This can be useful in certain cases where the multiplier needs extra time to perform the multiplication correctly.
MPYDLYWRTEN enables delay cycles when writing to the multiplication registers. This can help ensure that the correct values are written to the registers before the multiplication operation begins.
By setting MPY32CTL0 to MPYDLY32 + MPYDLYWRTEN, the delay cycles for both multiplication and writing to the registers are enabled. This can help improve the accuracy and reliability of multiplication operations performed by the MSP430's hardware multiplier
原文地址: https://www.cveoy.top/t/topic/fqDW 著作权归作者所有。请勿转载和采集!