本模具为一套6个工位的进料级模具主要用于冲孔、落料和废料切除。模具采用自动送料机进行送料适用于大批量生产时选用条料自动送料装置。步距为295mm模具长为350mm宽为280mm。模具结构如下图所示：改写

This is a 6-station progressive die used for punching, blanking and waste removal. The die is equipped with an automatic feeding device for mass production using strip feeding. The pitch is 29.5mm, and the die length and width are 350mm and 280mm, respectively. The die structure is shown in the following diagram: revised.