check below if any grammarly mistakeregard to your request we have been checked with the laboratory 1 The test standard&method of CANULC S102 is basically the same with ASTM E84 fire rated test we hav

Regarding your request, we have checked with the laboratory and found the following:

The test standard and method of CAN/ULC S102 is basically the same as the ASTM E84 fire rated test. We have already conducted the E84 test, and this test does not indicate whether the materials are suitable for certain scenarios only. I have attached the test report, and I hope this can be helpful to you.
In the test summary of CAN/ULC S102, the operator informed me that it is a standard format to only show "floor" and "other structures". All the test reports will be the same. Regarding your requirement, I asked the operator to offer a choice, but they said they cannot change the test report. The solution is to apply to do the test again and add something like "Wall covering PET acoustic panel" or "Ceiling PET acoustic panel" into the sample's name. However, this information will only be shown in the sample's name and not in the test summary. The test will also be the same. Please let me know if you still want to do this test. Thank you, and I look forward to your reply