Place 30-58 IO placement is infeasible Number of unplaced IO Ports 1 is greater than number of available sites 0The following are banks with available pins IO Group 0 with SioStd LVCMOS18 VCCO = 1
This error message indicates that the FPGA device does not have enough available sites to place all of the input/output (IO) ports required by the design. Specifically, there is one unplaced IO port, which is the BTN0_tri_io[0] port.
The available IO group is 0, which supports LVCMOS18 signaling with a VCCO voltage of 1.8V. However, there are no available sites in this group to place the unplaced IO port. This means that the design cannot be implemented on the current FPGA device without making changes to the IO requirements or selecting a different device with more available IO resources.
Possible solutions to this problem include reducing the number of required IO ports, changing the IO standard or voltage level to match available resources, or selecting a different FPGA device with more available IO resources. It may also be necessary to consult the device datasheet or use an IO planning tool to optimize the placement of IO ports for the design
原文地址: https://www.cveoy.top/t/topic/cz3j 著作权归作者所有。请勿转载和采集!