In a 25 ml beaker, 0.2 g, 0.4 g, and 0.6 g of ethyl cellulose samples were added separately along with 10 ml of ethanol solution. The mixture was heated and stirred in a water bath at 40℃ until completely dissolved, resulting in three different concentrations of ethyl cellulose solutions (0.02 g/ml, 0.04 g/ml, and 0.06 g/ml). These solutions were then evenly spread on a glass plate and scraped using a 1000 μm scraper to obtain three sets of ethyl cellulose-acetone methyl ester (ECA) films. The films were air-dried for half an hour to obtain the desired thickness. The formation mechanism of the ECA films was inferred by combining experimental observations with relevant literature using Fourier-transform infrared spectroscopy.

Next, a certain amount of the three sets of film samples were buried in soil at a depth of 3 cm to 5 cm, and three parallel experiments were set up. After a certain period of time, the samples were retrieved, washed, and dried, and the film quality was measured. The change in film quality was used to preliminarily determine the biodegradability of the films. In addition, the infrared spectra were used to detect whether new substances were produced during the degradation process. Furthermore, scanning electron microscopy was used to observe the microstructure of the film surface to understand the degradation process of the films.

帮我润色以下段落使其符合科研论文的逻辑:在一个容量为25 ml的烧杯中分别加入02 g、04 g、06 g的乙基纤维素样品并加入10 ml乙醇溶液。在40℃的水浴中加热搅拌直至完全溶解。此时得到了三种不同浓度分别为002 gml、004 gml、006 gml的乙基纤维素溶液。随后将这些溶液均匀地倒在玻璃板上并使用1000 μm的刮膜刀从上至下刮平。将样品风干半小时即可得到三组乙基纤维素-乙酸甲酯

原文地址: https://www.cveoy.top/t/topic/buol 著作权归作者所有。请勿转载和采集!

免费AI点我,无需注册和登录