翻译成英语：e跌落试验 按GBT48575-92《包装运输包装件-跌落试验方法》进行跌落试验在设备正常出厂包装条件下按GBT485717-2017《包装运输包装件基本试验-编制性能试验大纲的通用规则》等级Ⅰ的测试强度进行了面、棱、角部位的跌落试验。 实验条件：跌落高度600mm在经过试验后检验便携式吸痰器：1外包装箱无破损；2内部包材无破损；3内部样品整体结构完好无可视破损通电后设备开

E) Drop Test The drop test was conducted in accordance with GB/T4857.5-92 "Packaging Transport Packaging-Method of Drop Test". Under the normal factory packaging conditions, the drop test was performed on the surface, edge, and corner of the product at the testing intensity level I specified in GB/T4857.17-2017 "Basic testing procedures for packaging transport packaging-Compilation of performance test outlines and general rules". Experimental conditions: Drop height of 600mm. After the test, the portable suction device was inspected and met the following criteria:

1. The outer packaging box was undamaged;
2. The internal packaging materials were undamaged;
3. The internal sample was intact with no visible damage. After being powered on, the device operated normally without any abnormalities. Conclusion: Under normal factory packaging conditions, within the claimed effective period and transportation conditions, this device can guarantee the integrity of the packaging. 3.8.4 Confirmation of Transportation and Storage Requirements
4. Packaging The portable suction device is packaged in a specialized outer packaging box, which should include moisture-proof plastic bags and shock-absorbing materials. The box should also include a product certificate, product manual, and related accessories.
5. Transportation The portable suction device is suitable for any conventional transportation method. During transportation, it should be protected from rain, snow, and should not be mixed with corrosive substances.
6. Storage The portable suction device should be stored in a dry, ventilated, and non-corrosive storage room.