I need to stream 3D VR SBS stream from weblink to video stream on local network using ffmpeg

To stream a 3D VR SBS (Side-by-Side) stream from a weblink to a video stream on a local network using ffmpeg, you can follow these steps:

1. Install ffmpeg: If you haven't already, download and install ffmpeg on your computer. You can find the latest version for your operating system at https://ffmpeg.org/download.html.

2. Open a terminal or command prompt: Open a terminal or command prompt window on your computer.

3. Use the following command template to stream the 3D VR SBS stream:

ffmpeg -i "weblink" -vf "crop=w:h:x:y, stereo3d=sbsl" -c:v libx264 -preset ultrafast -tune zerolatency -f mpegts udp://<IP_ADDRESS>:<PORT>

Replace "weblink" with the actual link to the 3D VR SBS stream you want to stream. Replace <IP_ADDRESS> with the IP address of the computer on your local network where you want to receive the stream, and replace with the desired port number.

4. Run the command: Execute the command in the terminal or command prompt window.

5. Receive the stream: On the computer receiving the stream, you can use VLC or any other media player that supports UDP streaming to receive the stream. Open the media player and enter the network stream address in the format udp://<IP_ADDRESS>:<PORT>, replacing <IP_ADDRESS> and with the same values used in step 3.

The stream from the weblink should now be streaming to the local network through ffmpeg